Westcon Packaging, Weights & Design Aids

[ Home | Request for information ]

Pisa II

Nominal Dimensions

Thickness

Full Bundle

Stock Colors
Weight Packaging

Standard
standard.gif (2398 bytes)

 Width 8in
200mm

Depth 12 in
300mm		 6in
150mm		 2228 Lbs
1032 kg
(45 Lbs each)
(21 kg each)		 48 Pieces
16 Sq Ft

Natural
Antique
Cedar
Granite
Tan

Tapered
tapered.gif (2358 bytes)

 Face Width 8in
200mm

Back Width 67/8 in
174mm

Depth 12 in
300mm		 6in
150mm		 2001 Lbs
935 kg
(42 Lbs each)
(20 kg each)		 48 Pieces
16 Sq Ft

Left Corner
rightcorn.gif (3216 bytes)
Right Corner
leftcorn.gif (3231 bytes)

 Left & Right Corners

Width 20in/
500mm

Depth 8in
200mm		 6in
150mm		 2297 Lbs
1073 kg		 30 Pieces
15 Left Pieces
15 Right Pieces
35 Sq Ft
Coping Unit
ps-coping.gif (3394 bytes)		 9in Capstone
9"x24"		 3" 1594 Lbs 30 Pieces
60 Lineal Ft		 Brown
Charcoal
Natural
Tan
12in Capstone
12"x24"		 3" 2132 Lbs 30 Pieces
60 Lineal Ft
REVERS-A-CAP ™
Cap or Coping
 Face width 8" 200mm
Back width 7" 170mm
Depth 14" 356mm
Height 3" 75mm		 3200Lbs
1454 kg
(27 Lbs ea.)
(12 kg ea.)		 120 pieces
75 lineal Ft.		 Natural
Charcoal
Tan

 

Installation

 
inst-pII-1.gif (3236 bytes) Excavate
Remove soil to creat a trench 12" deep to 24" wide.  Shape the slope to allow for 12" of drainage material behind the wall.
inst-pII-2.gif (2985 bytes) Prepare Base
Place filter cloth in trench and up cut slope.  Fill trench with well graded angular gravel and compact to a depth of 6".
inst-pII-3.gif (2895 bytes) First Course
Position a level string line to mark the location of the first course.  Place units in center of prepared base and ensure unit is level from front to back and side to side.
inst-pII-4.gif (2813 bytes) Stack Units
Sweep units and place next course of units on top in a running bond pattern.   The edge of the unit should be at the middle of the unit below.
inst-pII-5.gif (2869 bytes) Backfill
Place drain tile and free draining soil behind wall.  Place gravel in front of wall to cover the first course.  Compact all soil.  Alternate between backfilling and placing units.
inst-pII-6.gif (3147 bytes) Secure Coping
Use approved adhesive to attach coping to the top of the wall.  Use a line of adhesive near the front and back of the unit.
inst-pII-7.gif (2170 bytes) Finish Grading
Pull filter cloth towards top of wall and cover with soil.  Ensure water will run away from wall.
NOTES TO PRODUCT NOMINAL DIMENSIONS, WEIGHTS AND PACKAGING TABLES:
  1. All dimensions are based on Metric Units with soft conversion to Imperial.
  2. All dimensions include a 3 mm (1/8 in) joint.
  3. Areas per bundle are calculated on the mold manufacturers dimensions with an allowance for standard sand joints.
  4. All product packaged on pallets.
If you require more information on this or any other service, please contact our office.

[ Home | Request for information ]

Copyright © 2003 Westcon Construction Products Ltd.